SHOWCASE




 

 

  

technical specifications:
-Cabinet available in three different models

  1. Mini Unit: 16 positions which cannot be extended. 
    Size LxHxD - 300x650x150

  2. Standard Unit: can be supplied with 10 to 60 positions with the option of adding an extension without having to change the previously set configurations. It is possible to add up to 43 extension cabinets to the Standard Unit to have a total of 2,640 positions which can be controlled by a single control panel. Size LxHxD - 1040x650x150

  3. Large Unit: can be supplied with 10 to 180 positions. The Large Traka has the same extension possibilities as the Standard Unit and is suitable for the control and management of large working environments. The system is made up of two components: the cabinet that contains the keys and a control panel.
    Size cabinet LxHxD - 600x1950x150.
    Size control panel LxHxD - 300x650x150

- The cabinet is made of steel of a width 15/10 and is coated with epoxy coloured RAL 1030-Ivory. The part which holds the Fobs is made of stainless steel. The standard door is made of 6mm thick polycarbonate. On request, the cabinet can be supplied with a 3mm thick aluminium door of the same colour as the cabinet.
- Power supply: 110/240 Volt; 50/60Hz
- 12 hour back up battery in event of power failure
- the control panel is equipped with four free contacts points which activate the alarms in the following cases: power failure, forced entry to the cabinet, attempted removal of a non-authorised key and a key which has not been returned under curfew
- both the electrical and transmission data connections are held inside the control panel. The panel can only be opened using the key supplied with the cabinet.
- the same key can be used to remove the protective covers of the fixing screws on the panels on which the fobs are fixed. The key can also be used to gain access to the bolts which fix the cabinet to the wall.
- none of the configuration parameters will be lost in the case of a power failure.
- the system is able to hold the last 8000 movements in its memory for up to 1,500 users.
- the keys are fixed to the fobs with a steel and polycarbonate security seal which carries a seven-digit number.
- the fobs are fixed one by one in the cabinet using a solenoid which is not externally visible.
- access to the cabinet is given by entering a PIN made up of 4 to 8 numbers into the keypad on the control panel. 
- it is also possible to install alternative devices to gain access to the keys:
1. magnetic card reader
2. barcode card reader
3. proximity tag or card reader
4. biometric fingerprint reader
- the keypad allows the user to discover who is the present user of a key which is not in the cabinet and to find out who was the last user of a key that is present in the cabinet.

Software details
- Traka software provides a series of features, which allow you to:

  1. with just one application, the user can manage a system of numerous systems with parameters and configurations individually personalised;

  2. allocate one or more keys to a user;

  3. allocate a restricted time limit divided by days and hours to any one user;

  4. authorize access to the software to each single user, by way of a password. The software also allows you to establish the level to which each user can access (configuration of the system, communication with the cabinet, adding or modifying the general parameters);

  5. allocate a key to other keys: if a key is allocated to another key which is not in the cabinet, that key cannot be removed;

  6. allocate to a key a maximum time limit for which it can be removed from the cabinet;

  7. to produce reports for each parameter, movement or alarm which can be seen on the screen, printed and transferred to another database;

  8. for each user and key there are 200 levels of security.

Communication with the PC
 - the cabinet can communicate with the PC using a serial port RS232 which connects it directly to the corresponding port on the PC
- using a serial line RS485
- using an existing LAN network with a conversion protocol RS232/Ethernet
- communicating with the telephone line to a modem installed externally to the control panel
- it is also possible to operate the system on more than one PC at the same time, configuring them as a Server/Client